Operating job computer on the field
Filling the slurry tanker
6
30322453-02-EN
V4.20191001
33
⇨
You can see the current status by the icons:
for Filling started and
for Filling
stopped.
⇨
All of the pre-set functions are activated successively.
4.
- Stop filling after the end of the sequence.
⇨
You have filled the tank using a pre-set sequence.
1.
- Optionally, you can now set the tank content manually to the maximum level.
Manual filling
1.
- Activate the manual filling mode.
⇨
The following icon appears in Area 1:
2.
Select a filling mode.
3.
- Start filling.
⇨
You can see the current status by the icons:
for Filling started and
for Filling
stopped.
4.
Depending on the equipment of the slurry tanker, perform the following functions:
▪
▪
Using a folding sequence for filling arms
▪
Opening and closing the valves [
▪
Increasing the filling speed [
▪
Chopping up foreign objects in the slurry [
Moving the filling arms
All of the filling arms on the slurry tanker can be moved. You can lift or lower the individual parts of
the filling arm for the filling procedure.
This is how you reach the screen with this function:
> (
)
The function buttons differ depending on which filling arm you are using. On the screen, you can see
a diagram with the respective moving parts of the filling arm.
Use the following function keys to operate the function:
Procedure
6.2.1
Path
Controls
