muli ST+PX, Руководство пользователя

Страница: 58 / 75

114 115
Proceed as follows to insert the child seat into the cargo basket:
Inserting the child seat into the basket
1. Place the basket in position.
2. First push the plastic toggle at the
back of the seat from bottom to top
through the basket eyelets.
3. Pull back the locking bolts on both
sides and turn the red knob slightly
so that the bolt locks in the retracted
position.
4. Place the bar of the child seat
evenly on both sides. To do this,
take the first rod with both hands at
each end. Insert the rod evenly and
parallel into the child seat raincover
holders on the left and right.
If necessary, use both hands to push
the basket wings slightly apart so
that the rod can engage in the pro-
file.
5. Pull back the latch bolt, turn the
knob slightly so that the bolt locks
into the child seat raincover mount.
If a very high pressure on the wings is necessary to insert the rods, the rods are
set too long and can be shortened by screwing in the end pieces. In this case,
loosen the lock rings on the end pieces of the rod and screw in the end pieces
slightly. Tighten the counter rings again.
This procedure applies to the installation of the seat both against and in the
direction of travel. Always remember to fasten the plastic toggles to the basket
eyelet. Otherwise, the backrest will not be sufficiently secured to the basket.
Always remember to fasten the plastic toggles to the basket eyeled.
Otherwise, the backrest will not be sufficiently secured to the basket
and consequently your child is also not safely strapped in.
Child seat and child transport in the e-muli