muli ST+PX страница 36 Скачать руководство пользователя

Страница: 36 / 75

The support modes have the following characteristics:

Eco

Lowest pedal assistance. Particularly suitable for journeys on level, good road

surfaces without any particular inclines and with a low load. On long distances,

the highest range is achieved in Eco mode.

Normal

Medium pedal assistance. Suitable for journeys on routes with alternating flat

and slightly uphill sections and changing surfaces and for journeys with a me-

dium load.

High

Strongest pedal assistance, suitable for trips on challenging routes with many

inclines and with a heavy load.

In addition, you can also ride the e-muli px very well with the assistance swit-

ched off, for example, to save battery capacity on long distances. The switched-

off drive does not produce any increased pedaling resistance.

Do not change the support levels while riding, but stop briefly to select another

support mode.

For more information on assistance levels, refer to the enclosed Pendix system

manual. Please also take care when setting the

Please also take care when setting the support levels not to change them while

riding.

Charging the battery

You can charge the battery both on the supplied plate station and without the

plate station directly on the cable. To charge the battery directly on the cable,

lay the battery on its side and insert the plug into the contact point of the bat-

tery.

The plug fits only in a certain position and locks magnetically. An illumination of

the LED indicator tells you that the charging process has been initiated. When

fully discharged, an average charging process takes about three hours.

You can charge the battery at any time and do not have to wait until it is com-

pletely discharged. The life of the battery is not shortened by this charging. The

so-called „memory effect“ does not occur.

Check the battery at regular intervals to ensure that it is

intact. Do not open or disassemble your rechargeable bat-

tery. Danger of explosion!

Charge the battery at an ambient temperature of 15 to 25

degrees Celsius. In winter and cold weather, allow the bat-

tery to warm up to room temperature before charging it. If,

on the other hand, the battery has warmed up during ope-

ration, allow it to cool down first.

Battery and control unit

Pendix eDrive 300

Содержание ST+PX












































































Результаты поиска

Содержание ST+PX

Отзывы:

Похожие инструкции для ST+PX

Бренды по названию

Популярные бренды

muli ST+PX, Руководство пользователя

Результаты поиска

Содержание ST+PX

Отзывы:

Похожие инструкции для ST+PX

Бренды по названию

Популярные бренды