muli ST+PX страница 68 Скачать руководство пользователя

Страница: 68 / 75

134

135

Your e-muli does not protect you in case of accidents, therefore always drive

carefully and with foresight and observe the applicable traffic regulations.

Impacts and high loads can weaken and damage the e-muli. Damage is often

not immediately apparent after a violent impact or fall. It is therefore essential

to have your e-muli checked at a specialist workshop after a fall. Accessories,

such as the child seat, must also be checked for integrity if they are involved in

a fall or impact.

Check the battery after a fall. If the battery is no longer correctly seated in its

holder or shows signs of damage, you must not use the e-muli in motor mode for

the time being. Switch off the drive at the battery.

Damage to the battery can lead to short circuits or, for

example, that the drive suddenly no longer supports

while driving. A damaged outer casing of the battery

can allow water or moisture to enter, which can lead

to short circuits or electric shocks. The battery may

ignite or even explode! Do not store a damaged batte-

ry in closed rooms.

After a fall, check the display for damage. If an error

message or a warning is displayed, you must no longer

use the e-muli. Check whether the error messages di-

sappear after switching off the system for at least 10s.

For more information, refer to the system manual of

the drive manufacturer.

Never drive the e-muli with the motor support switched on

if an error message or warning is displayed.

Deformed parts can break abruptly. They must also not be

straightened, i.e. not bent straight, because even then there

is an acute risk of breakage. Never drive your e-muli if it

shows deformations or cracks on a component.

Impacts and accidents

Содержание ST+PX












































































Результаты поиска

Содержание ST+PX

Отзывы:

Похожие инструкции для ST+PX

Бренды по названию

Популярные бренды

muli ST+PX, Руководство пользователя

Результаты поиска

Содержание ST+PX

Отзывы:

Похожие инструкции для ST+PX

Бренды по названию

Популярные бренды