muli ST+PX, Руководство пользователя

Страница: 13 / 75

24 25
Open the cardboard box on the side of the front wheel, remove the wheel triang-
le and carefully pull the e-muli out of the box. Hold the e-muli in the scales while
pulling it out and make sure that it does not tip over. To assemble the e-muli, first
unfold the double-leg stand. This ensures that the e-muli stands securely.
Mounting the steering linkage
The e-muli is completely pre-assembled and adjusted except for a few parts.
You only need to carefully fasten one screw - the connection of the steering arm
to the steering linkage. It is important that you plug the individual elements onto
each other in the correct order. The screw is attached to the steering linkage and
prepared accordingly.
1. Guide the steering tube extension and the swivel bearing head of the steering
linkage over each other and put the individual parts on top of each other. To do
this, simply loosen the nut at the bottom, remove the nut and washer. Then put
the bolt through the extension arm and
put the washer and nut back on the bolt. The slide bearing for the boom is then
pressed into the boom by tightening the screw.
by tightening the screw.
2. When you have prepared the con-
nection accordingly, tighten the screw
with a 6 mm Allen key and a 13 mm
open-end wrench. This presses the
plain bearing into the cantilever. Sin-
ce this is a self-locking nut, you can
adjust the heavy or light steering mo-
vement via the contact pressure of
the screw. Adjust the screw pressure
so that the handlebar can be turned
comfortably. A very high contact pres-
sure increases wear, a very low pres-
sure can cause the steering linkage to
rattle. Check this screw connection at
regular intervals!
3. Then carry out all the instructions given in chapters 4 and 5 („Before the first
ride“ and „Before each ride“).
Attention! The steering linkage is a highly safety-relevant
component. Fasten this screw connection with the greatest
care and ensure that the connection is firmly seated.
Boom Prepared screw
Plain bearing
Swivel bearing of the steering linkage
Plain bearing
Ball bearing
Plain bearing
Boom of the steering linkage
Washer
Self locking nut
Screw
Assembly instruction