muli ST+PX, Руководство пользователя

Страница: 55 / 75

108 109
Furthermore, make absolutely sure that
you do not tension the covers too much.
It must be possible to open the basket
wings fully and they must rest on the
frame supports when open. If the co-
vers are too tight, the basket will have
play at the sides and will permanently tilt
back and forth slightly, thereby placing
too much stress on various components
and the covers, which may bend, tear or
break as a result. Note that the driver-si-
de basket cover is fastened to the cable
duct in the center with a screw.
When you have parked the e-muli, make
sure that you or children in the basket do
not exert unilateral, high, vertical pres-
sure on the open basket wings when get-
ting in and out. This may cause the e-mu-
li to tip sideways over the stand and fall
over. Especially at the front, upper edge,
such pressure should be avoided, it can
quickly cause the entire wheel to tip over
here.
Always secure the e-muli against tipping
over when children get on and off the
bike by holding it firmly by the handle-
bars.
Never guide only one wing with momentum against the
locking bow on the steering tube. The basket wings
only engage in the locking mechanism if you guide both
wings together and at the same time with a slight swing
against the locking bow.
Do not knock basket wings together with great force.
Exerting great force here can cause components to
bend and break.
Make sure that the edge protector is always mounted in
the recessed grip. Otherwise you risk dangerous injuries
at the exposed sheet metal edge.
Since the load basket of the e-muli is not a rigid cons-
truction but a moving part, you must use the load bas-
ket with particular care and caution. Make sure that you
do not exceed the load limits of the basket, that you
always open and close the basket carefully and that you
carefully secure and brace every load that you trans-
port.
Improper use, violent tugging or pushing on the basket
wings or blows and impacts on the basket wings, e.g.
due to a fall, can cause components to bend and the
basket can no longer be closed.
Load basket