MuL Technologies 3 Series, Руководство пользователя

Страница: 31 / 44

31
Inserting the battery pack into MARC
To insert a battery pack into MARC, follow these steps:
• Make sure battery is charged. You can check this by pressing the button on the battery level indicator.
o See Charging the batteries on page 29 .
• Ensure the key switch is in the unlocked position. (❶ in figure below).
• Guide the battery slots to the battery rail on MARC and slide in ( ❷ ).
•
Slide battery until the power connectors are snug.
• Flip the foldable handle upward.
•
Turn the key to locked position, being sure to press key in and slowly release it as you turn it.
o If you are going to use the cart immediately, insert and turn the key to powered ON position (❸) , and
press cart power button to boot up the cart. This process takes 2-3 minutes and ends with an
announcement, “Cart ready” and LEDs pulsing green .
Batteries should not be stored in very hot or very cold conditions, or to be subject to conditions of high
moisture. They also should not be stored in a fully discharged state.
Store your battery between 15 °C (59 °F) and 25 °C (77 °F) in a dry area.
If your battery pack is not in use for an extended period of time, it is imperative that you charge the
battery pack before storage and then charge the battery pack once a month to prevent deterioration.
❸
❶
❷