MuL Technologies 3 Series Скачать руководство пользователя страница 20

Страница: 20 / 44

A red check engine symbol indicates there is a critical issue with the cart. Autonomous mode and powered

manual drive mode are both disabled when there is a critical issue. For more see

Troubleshooting

on page

Premium models only

The volume (+) button increases the volume in increments of 10%, and the volume (–) button decreases

volume in increments of 10%. When in the main screen showing the programmed location buttons, tap the

battery level button on the lower right to access the second screen with the volume adjustment buttons.

Premium models only

MARC carts offer a safety beeping option, which is heard while MARC is moving in autonomous mode. This

beeping, similar in sound to a traditional forklift, is a double-beep active while in motion to warn workers

nearby that the cart is in motion. Note the volume is increased and decreased using the volume buttons

that control the audible system notifications and both are adjusted together. Warning beeps can be

enabled or disabled using the single button, and current status is displayed on the button as shown to left.

Premium models only

Powered manual drive keys allow the user to operate the cart manually. The buttons will move the cart in

the direction shown when pressed.

Use caution, as during manual movements the safety features of the

cart are disabled

. When in the main screen showing the programmed station buttons, tap the battery level

button on the lower right to access the second screen with the manual drive buttons. For more information

on using manual movement, please see

Powered manual movement mode (Premium models only)

page

NOTE:

All safety features are disabled while using the powered manual movement mode.

Operator is responsible for safe movement of MARC in

any

manual movement mode. Great

care must be taken while using powered manual movement mode.

Tapping any button during movement will cancel the route. If you tap the wrong location, for example, you

can immediately press any key to abandon the route and then press the correct location button.

Содержание 3 Series













































Результаты поиска

Содержание 3 Series

Отзывы:

Похожие инструкции для 3 Series

Бренды по названию

Популярные бренды

MuL Technologies 3 Series, Руководство пользователя

Результаты поиска

Содержание 3 Series

Отзывы:

Похожие инструкции для 3 Series

Бренды по названию

Популярные бренды