MuL Technologies 3 Series, Руководство пользователя

Страница: 21 / 44

21
Value (6-button) EZ-Go Navigation system overview
Station buttons 1-4 display in grey when they are not programmed for a specific destination. Press and hold
a grey button until you hear the double-beep indication (approximately 3 seconds) to program that
destination with the unit’s current location. The button will then turn green indicating it is programmed.
Station buttons 1-4 display in green when they are programmed for a specific destination. Tap these
buttons to send the unit to its destination designated for the specific number pressed.
CLEARING:
If you wish to clear a set location for a station button, press and hold the button for more than
6 seconds but less than 10 seconds until you hear the triple-beep indication. When released, the button
will return to a grey color.
REPROGRAMMING:
If you wish to set a programmed button to its current location, press and hold the
button for approximately 3 seconds until you hear the double-beep indication.
Under normal operating conditions, the bottom right button is reserved to display the battery’s cur rent
charge status. This button also allows users to switch between the first and second screens.
The Save Map button is used to save or erase the currently mapped area and also used to indicate the
current map status. The button appears grey if there is currently not a saved map (Active Map Mode) and
green when a map is saved (Fixed Map Mode). To save a map, press the button for 3 seconds till the
double-beep confirmation is heard. The button will turn green and the audio cue “Map saved” will be
heard. To erase the currently saved map, press the map button for 6 seconds but less than 10 seconds until
you hear the triple-beep tone. The button will turn grey, indicating the map has been erased, and the audio
cue “Map erased” will be heard. When a map is not saved (Active Map Mode), turning the cart off or
rebooting will cause the currently mapped area to be deleted from the system. See Operating modes:
Active and Fixed on page 22 for more information.
A yellow check engine symbol indicates there is an urgent issue with the cart. It is still possible to operate
the cart, but the issue should be addressed as soon as possible. For more see Troubleshooting on page 37 .
Press the battery level indicator button to return to the main screen.
A red check engine symbol indicates there is a critical issue with the cart. Autonomous mode and powered
manual mode are both disabled when there is a critical issue. For more see Troubleshooting on page 37 .
Tapping any button during movement will cancel the route. If you tap the wrong station, for example, you
can immediately press any key to abandon the route and then press the correct station button.
Your MARC may have a 15-
button navigation system.
See full overview in previous
section.