MuL Technologies 3 Series, Руководство пользователя

Страница: 35 / 44

35
Cleaning MARC
MARC systems are made from an extremely durable polypropylene material that will not leak, rust, chip, dent or peel,
and will maintain a professional appearance for many years. The RCP unit (drive system) is made from very thick, strong
powder coated steel enclosure to ensure protection of the electronics.
There are sensitive electronic components in MARC.
•
Make sure to disconnect and remove the battery pack prior to cleaning.
•
Never submerge any part of MARC.
•
Never spray liquids directly at any parts of MARC.
•
Never use harsh chemicals to clean any parts of the cart.
• Never spray cleaner directly onto any electronic components, including the EZ-Go Navigation panel, sensors or
LIDAR unit . Instead, spray a small amount of mild cleaner onto a rag or towel, then gently wipe the surface of
the button area with the moist cloth.
Here are some general tips for cleaning your MARC products:
• MARC is not waterproof and should not be sprayed directly or submerged.
• If using a household or industrial cleaner, be sure to test a small area to verify it does not damage the
polypropylene material.
• Spray or dip a cloth into the cleaner and wipe the cart with a damp (not wet) cloth.
• For stubborn stains, consider using Mr. Clean Magic Eraser or similar product.
•
If the drive wheels of MARC come in contact with liquids or any slippery materials, clean the wheels to ensure
MARC will have sufficient traction for the surface it operates on.
• The cameras and proximity sensors may accumulate dust and should be cleaned on a regular basis.
Cleaning the sensors and cameras:
•
Air is the best non-contact method for cleaning dust and debris from the sensor and camera surfaces.
• A clean, soft, lint-free cloth can be used to gently wipe sensor and camera surfaces.
•
Chemical cleaners should not be used on electronic components or plastic mounting structures.