MTS Sensors Temposonics Powerlink V2 R Series, Руководство по эксплуатации

Страница: 32 / 52

Temposonics
®
R-Series Powerlink V2
Operation Manual
I 32 I
5. Click the radio button “Use the following IP address”
and set an own static IP adress (Fig. 50).
Fig. 50: Static IP address
Fig. 51: Choose ethernet adapter
NOTICE
MTS Sensors recommends for the IP settings:
Net ID:
192.168.100.XXX
Host ID: 1 – 239
Subnet mask: 255.255.255.0
Example (Fig. 50) :
IP: 192.168.100.230
Subnet mask: 255.255.255.0
6. Reboot the computer.
6.1.3 Node ID configuration

Step 1: Network adapter set-up

Step 2: Node ID configuration

Step 3: Process data
Fig. 52: Search for node ID
2. Click on “Search for Node” to figure out which node ID the
connected sensor has (Fig. 52). The default node ID is 32.
Fig. 53: Node ID found
3. The current node ID is displayed (Fig. 53).
1. Start the MTS Powerlink software (download at
www.mtssensors.com). Choose the correct ethernet
adapter from the drop-down menu (Fig. 51).