MSI 3750CS-5 Скачать руководство пользователя страница 21

Страница: 21 / 96

CellScale

System • 3750CS-5 User Guide Page 21

MEASUREMENT SYSTEMS INTERNATIONAL

Software V2-21 or greater, 2nd Generation Modem

Tare - Rules for Use:

1) Only positive gross weight readings can be tared. Weight can be tared in both the NET and GROSS modes.

When in the NET mode, the TARE is not cumulative, all the weight is zeroed.

2) The motion annunciator must be off. The weight reading must be stable.

3) Setting or changing the tare has no effect on the Gross zero setting.

4) Taring will reduce the apparent over range of the scale. For example, taring a 10 lb.. container on a 60 lb..

scale, the scale will overload at a net weight of 50 lb.. (60-10) plus any additional allowed overload (usually

~4% or 9d).

5) The scale stores the Tare value in the current ID Code memory until cleared. Each available ID Code can store

independent Tare values.

Multiple Tare Memories

The 3750CS is capable of storing Tare values through the use of the ID Codes. Each ID code stores an independent

Tare. See Section 3 “ID Codes” for more information.

SETUP TARE

Programs the

TARE

key mode (TAREMODE), the automatic TARE Clear function (AUTO CLR), and the

TAREALL function.

UNIV TAR

TAREMODE

1) AUTO – Only Auto Tare is in operation. Every time the TARE key is pushed, the current weight on the scale

is tared.

2) KBD/UPDN – In this mode, pushing the TARE key will enable the numeric keypad for Keyboard Tare and

the

UP/DOWN

scroll keys for TARE

UP/DOWN

. Also in this mode, pushing the TARE button a second time

will enact AUTO Tare.

UNIV TAR

The Universal Tare feature allows a single Tare value to be shared by all ID Codes. With UNIV TAR enabled the

individual Tares stored with each ID Code are ignored (but not erased). Disabling UNIV TAR will restore the

original Tare values. UNIV TAR is intended for those applications where a common carrier or pallet is used, but

multiple ID Codes are necessary for data collection.

AUTO CLR

Enabling “AUTO CLR” causes the 3750CS to clear the Tare Value after each lift greater than 0 NET. The Tare

Value is cleared and the display mode reverts to Gross Weight once the load is removed (the weight goes below 0

NET). The “ON TOTAL” setting clears the Tare Value after the load is totaled. The default for the “AUTO CLR”

function is “DISABLED” . When disabled, the Tare Value can only be cleared manually (see “To Clear Tare and

return to Gross Mode”.)

Содержание 3750CS-5

































































































Результаты поиска

Содержание 3750CS-5

Отзывы:

MSI 3750CS-5, Руководство пользователя, Страница: 21 / 96

Результаты поиска

Содержание 3750CS-5

Отзывы: