Operating manual
Page 8
2
INTENDED USE OF THE PRODUCT
2.1
O
PERATIONAL CONSTRAINTS
The Product shall have proper grounding, all cables shall be insulated; non-insu-
lated / bare ends shall be absent.
The Product cannot be operated in the open deck environment.
To ensure convenient electrical installation and service, provide free passage to
the Product and access to detachable parts.
Place for installation of the Product shall be selected in accordance with the oper-
ational constraints (operating temperature, IP rating).
2.2
U
SAGE PREPARATIONS
2.2.1
Safety features
While preparing the product to operation provide a visual check after unpacking
and make sure that any mechanical damage is absent.
Before using the Product ensure the following steps:
a.
train staff to use the Product and checkout equipment, as well as occupational
safety applicable in the field;
b.
use only standard fuses;
c.
follow “Rules for Operation of Customers' Electrical Installations” and “Safety
Rules for Operation of Customers' Electrical Installations” while testing electrical circuits
and insulation resistance of the Product.
2.2.2
Method and sequence of the Product’s visual check
Before powering the Product on the user shall:
a.
check visually the integrity and initial position of control elements;
b.
clean any contamination or dust from the front panel with clean soft cloth, if
present;
c.
check reliable fastening of cable connectors to the Product.
2.2.3
Switch on instructions
To switch the Product on, transfer a circuit breaker on the mains switchboard to
ON position, then the Product will automatically switch on.