Operating manual
Page 32
Figure 24 – Settings of ports
Once you press «
» in
Receiving
– you open the menu to edit a sentence received
by this port. Provide all required sentence settings, see cl. 2.3.13.2 and Figure 24, press
«ОК» and continue with editing the new sentence.
To configure continuous data transmission, provide the above mentioned settings
for all NMEA sentences, herewith all received sentences by each port shall be in accord-
ance with Appendix A in full. To add NMEA sentences, press «
».To configure selec-
tive data reception, press «
». Using this button the user can remove all NMEA sen-
tences, which are excluded from selective data reception or transmission. To remove all
NMEA sentences, received by this port, press «
».
The controls of tab page
Ports
are represented in Table 20.
Table 20 – The controls of tab page
Ports
Name
Function
ОК
To confirm the select
Apply
To apply the selected settings
Cancel
To cancel the selected settings
To edit port settings
To remove the selected NMEA sentence from port traffic
To add the selected NMEA sentence to port traffic
To remove all NMEA sentences from port traffic
To transfer to Editing mode