
Universal digital repeater
DR-209M
Page
13
Configuration menu includes the following tab pages, see Table 3.
Table 3 – Main menu tab pages
Name
Settings
Common
Language settings, inclinometer parameters (if one is operated at the facility),
alarm interval, emulation switching on (off), language select.
Alarm
Activation of alarms by the data received from the connected systems and
devices.
Measurement units
Setting measurement units / values of the displayed data.
Displays
Configuration of information screens, display modes and types of the dis-
played data.
СОМ
Configuration of reception-transmission ports, selection of NMEA data
transmitted by the selected port.
Rx
Diagnostic check of ports operability.
System settings
Settings up current time, OS update, screen calibration and operation in the
service mode.
2.3.7
Data display modes
Received data are displayed on the LCD in the following modes:
a.
graphic;
b.
digital;
c.
in graphs;
d.
without indicator (data are not displayed on the screen).
2.3.7.1
Graphic display mode
The following data are displayed in the graphic display mode, see Table 4.
Table 4 – The data displayed in the graphic mode
Parameter
Description
Parameter
Description
Speed
wind
Depth
sensor
true
keel
relative
surface
true water
Temperature
water
ground
air
rate of turn
1, 2
Pressure
atmospheric
drift
Inclinometer
inclinometer
1
Humidity
absolute
pitch
relative
roll
Heading
true
Course
true
magnet
magnet
Notes
1 Data may be displayed in different views.
2 «+» and «-» serve to change scale calibration in the operation mode.