Universal digital repeater
DR-209M
Page
17
Figure 9 – Tab page
Common
The following controls are located in the tab page
Common
, see Table 7.
Table 7 – Tab page
Common
Name
Function
ОК
To confirm the select
Apply
To apply (save) the selected settings
Cancel
To cancel the selected settings
Alarm interval (sec.)
To set up a time interval, during which displayed data are valid; if
setting up a filter – time interval, during which average values are
displayed
Language
To select the language (for displayed parameters)
Emulation
To switch on/off emulation mode
Time to GPS
To set up GMT time (by data received from a satellite)
Filters
To switch on a filter for average value output of the required pa-
rameter
Time zone
To select a time zone (world coordinate time (average time) GMT
time, correction for time zone)
Coordinate system
To select system of coordinates depending on the tasks
If
Time to GPS
is on, displayed time is automatically corrected and presented in
true time UTC (GMT).
Alarm interval
indicates a time interval during which the displayed data are valid.
As soon as the interval expires, the data will not be displayed and take a view of
« – – – ».
Once an averaged value filter
Filter
is switched on, a screen to edit parameters,
required for average values display, is opened, see Figure 10.