MRM LFP, Быстрый старт

Страница: 79 / 92

LFP Quick Start Guide
75
Data Out connector
The Data Out (DataLink Out) connector is used to connect the LFP to a
head when the LFP is booted up in Flair mode and used only as a slave
mimic device. For usage see page 71. Bit rate 10Mbps.
1. Watchdog–
2. Out–
3. In–
4. N/C
5. N/C
6. W
7. Out+
8. In+
9. N/C
Serial A connector
Serial A is an RS232 port used for updating the firmware in the LFP, and
for connecting the LFP to an Ulti-Head or any other head that can use an
RS-232 serial connection (as opposed to Ethernet or DataLink). The Baud
rate is 76.8 kbps.
1. N/C
2. TX-A
3. RX-A
4. N/C
5. GND
6. N/C
7. N/C
8. N/C
9. N/C
6
1
5
9
6
1
5
9