MRM LFP, Быстрый старт

Страница: 27 / 92

LFP Quick Start Guide
23
Creating a move by defining start and end points
1. In Film mode, choose menu option
REC-PLAY AXES > A->B
WAYPOINT MOVE > SET POSITIONS > POS A:STORE CURRNT?
.
2. Move the head to the starting point of the move, and set the lens
controls the way you want.
3. Press
SELECT
.
The starting point is now stored:
POS A:STORED
4. Scroll to
POS B: NOT STORED
and press
SELECT
.
5. Move the head to the end point of the move, and set the lens
controls the way you want.
6. Press
SELECT
.
The end point is now stored:
POS B:STORED
7. Press
BACK
, then use option
SET MOVE DURATION > MOVE
SECONDS
, to set amount of time that you want the move to take, in
seconds.
8. Press
BACK
then use option
SET A->B FAIRINGS > UP FAIRING
to set the acceleration for the start of the move. For example, a value
of 25% means that the head will use the first 25% of the movement
to accelerate from 0 to the move’s full speed.
9. Use the option
DOWN FAIRING
to set the deceleration for the end of
the move. For example, a value of 25% means that the head will use
the last 25% of the move to slow from the move’s full speed to 0.
10. Press
BACK
then use option
GENERATE A->B MOVE
(pressing
SELECT
again if prompted) to create the move.
Hint
All synchronization sources are rising-edge triggered. For
information on how the sync facility interacts with playback,
camera triggering, and bloop light triggering, see
Summary of
playback events on page 30.