MRM LFP, Быстрый старт

Страница: 36 / 92

LFP Quick Start Guide
32
following example uses
FRAMES: 4
,
FRAME TIME: 10
, giving
a total playback time of 40 seconds.
Note that because the controller takes frames at both the start
and end of the move, it actually takes a total of
FRAMES
+1
frames, so 5 total frames in the above
FRAMES: 4
example.
This makes it easy to calculate the total time as
FRAMES
×
FRAME TIME
.
•
TYPE:
One of:
–
SLOW-MOTION
- the head and lens settings don’t stop
during the exposures. The move is played as one
continuous motion, and the camera is triggered at the
correct points along the way.
–
STOP-FRAME
- the head and lens axes stop just before
triggering each exposure. The head and lens axes
essentially perform a go-to at each frame, then stop and
hold position while the frame is exposed. If you choose
this option, the LFP also calculates and displays a
MIN
FRAME
value. The
FRAME TIME
that you specify above
must be larger than this value so that the axes have
enough time to accelerate, move, decelerate, and stop
between exposures.
In the above example, the slow motion and stop-frame
playback would each take 40 seconds of total running time.
The stop-frame would execute the move in four distinct
motions, each of which would come to a stop just as the trigger
point is reached.
6. Press
BACK
then
TL PLAYBACK
.
10 10 10 10
Time
Start
(Trigger) Trigger
Trigger Trigger
Trigger
Count-
down
40 30 20 10 0