MRC INE-PHSJ-5, Инструкция по эксплуатации

Страница: 6 / 19

INE-
PHSJ-5 pH Meter
5
IV. OPERATION
1. Installation

put the meter and multi-function support stand on the table

put pH combination electrode and temperature
sensor onto the electrode supporter ;

pull out Q9 short circuit plug;

insert pH combined electrode into measuring
electrode socket

insert temperature sensor into temperature sensor
socket

twist the cap off the fuse socket, put 0.5A/220V
fuse into it and then twist the fuse cap on;

Connect power line with the meter.
Note: In general, the
fuse has been placed in before ex-factory;
If user matched meter with TP-16 printer (please refer to the instructions of printer for
installation), please separately insert printer‟s connect line into RS-232 socket and printer
socket.
2. Power on/off
Power on the meter, after connecting power line with the meter, it will enter measuring state
automatically. After measuring, insert Q9 short circuit plug, power off the meter.