MRC INE-PHSJ-5, Инструкция по эксплуатации

Страница: 8 / 19

INE-
PHSJ-5 pH Meter
7
4.1Set system time:
Press “SETUP” button, then press “ENTER” button to enter setting system time mode.

The current system time is shown on the top of the screen;

The corresponding time keys are at the bottom of the screen, including “YEAR”
、
“MONTH” 、
“DAY”
、
“HOUR” “MINUTE”
、
“SECOND” button.
Press corresponding time button to set time. For example: set current month: press “MONTH”
button once to add one month on top of current month, at this time screen shows another two
buttons, it is “SETUP” button and “….” button. Please refer to dia4 (Diagram 4):
Diagram 4
 Press “MONTH” button repeatedly to select month you need, press “SETUP” button to enter.
(or use entering method: press “…” button, spring out a entering window, enter your needed
month directly and press “ENTER” button to exit entering window, press “SETUP” button
again to finish the setting)
Set other time is the same as above procedure.
After setting, press “X” button to exit system time setting mode, and be back to starting working
state.
4.2Set mV solution
This meter can be set mV solution, 0.1mV or 0.01mV.

Press “SETUP” button to select “mV solution” and press “ENTER” button, you can
set mV displaying solution. The meter will show “Setup solution…….”.
After setting, the meter returns to
starting working state.