MRC INE-PHSJ-5, Инструкция по эксплуатации

Страница: 9 / 19

INE-
PHSJ-5 pH Meter
8
4.3 Set pH solution
This meter can be set pH solution, 0.01mV or 0.001mV.

Press “SETUP” button to select “pH solution” and press “ENTER” button, you can
set pH displaying solution. The meter will show “Setup solution…….”.
After setting, the meter returns to
starting working state.
4.4Set manual temperature
The temperature electrode is connected with the meter, the meter displays temperature value
through temperature electrode; If not, the meter displays temperature value set by manual.
 Press “SETUP” button, select item “Default Temp.” , press “ENTER” button to enter manual
setting temperature;
 Press “SETUP” button or direct press it once in the area of manual temperature setting, spring
out an input window, enter corresponding manual temperature value.
Setting is completed and the meter is back to starting working state. Please refer to Diagram 5:
Diagram 5
4.5 Set temperature sensor
Two temperature electrodes can be selected, Pt1000 temperature electrode or RT2252
temperature electrode. User must set corresponding temperature electrode according to the types
of connecting temperature electrode.

Press “SETUP” button, select “Temp. Electrode”, press “ENTER” button to confirm. Please
refer to Diagram 6:
Diagram 6