INE-
PHSJ-5 pH Meter
6
3.Starting state
The meter enters pH measuring state directly after turn on. Please refer to (Diagram 1):
The pH measuring result and system time is displayed on the upper side of the screen;
The corresponding potential
、
current temperature value
、
types of temperature electrode and
automatic temperature compensation state prompt is displayed on lower side of the screen;
Diagram 1
The touching keys are on the right of the screen.
Users can press “SETUP” button
、
“VIEW” button
、
“STD” button
、
“SAVE” button
、
“PRINT” button
and “DEL” button to enter corresponding working state directly
4.Set function
User should check the system of the meter before using, including system time
、
types of
temperature electrode
、
manual temperature value, etc before operation. Please refer to Diagram 2:
At beginning state, press “SETUP” button, the meter displays set menu. You can set
system
time
、
mV
resolution
、
pH resolution
、
manual temperature
、
types of temperature electrode
and mV zero point, etc.
Diagram 2
Users can press corresponding menu twice to select corresponding function or press corresponding
menu once, then press “ENTER” button to select corresponding function; press “CANCEL” button
or press “X” to exit.
