MR MESSKO MSAFE Скачать руководство пользователя

Страница: 6 / 60

1 Introduction

7232312/00 EN

WARNING

Type of danger!

Source of the danger and its consequences.

► Action

1.3.1.2 Embedded warning information

Embedded warnings refer to a particular part within a section. These warn-
ings apply to smaller units of information than the warnings relating to sec-
tions. Embedded warnings use the following format:

DANGER!

Instruction for avoiding a dangerous situation.

1.3.1.3 Signal words and pictograms

The following signal words are used:

Signal word

Definition

DANGER

Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.

CAUTION

Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.

NOTICE

Indicates measures to be taken to prevent damage to property.

Table 1: Signal words in warning notices

Содержание MESSKO MSAFE





























































Результаты поиска

Содержание MESSKO MSAFE

Отзывы:

Похожие инструкции для MESSKO MSAFE

Бренды по названию

Популярные бренды

MR MESSKO MSAFE, Руководство по эксплуатации

Результаты поиска

Содержание MESSKO MSAFE

Отзывы:

Похожие инструкции для MESSKO MSAFE

Бренды по названию

Популярные бренды