manualshive.com logo in svg

MPC 1250, Руководство оператора, Страница: 5 / 44

Поделиться
Скачать
MPC 1250 Скачать руководство пользователя страница 5

Section I 

Warnings

006-0007207 MPC-1250DC Guide  

Rev F 

5 of 44

 03/03/2022 

 

www.synqor.com

Hazardous Energies

The INPUT AND OUTPUT POWER connectors and cables of the SynQor MPC may be the source 

of high levels of energy. Do not inappropriately make electrical contact between any terminal of 

a connector and another, or between any wire of a cable and another, or between any terminal 

or wire and the MPC’s chassis or ground. DAMAGING ELECTRICAL ARCS may result. Care should 

be taken to avoid accidental electrical contacts of this sort.

Protection from the Environment

The SynQor MPC is a ruggedly built product having its electronics contained in sealed chambers. 

It  is  capable  of  withstanding  harsh  levels  of  mechanical  acceleration,  shock  and  vibration, 

temperature and pressure variations, and exposure to water, salt, sand and dust within the levels 

specified in the data sheet. THESE LEVELS SHOULD NOT BE EXCEEDED.
Do not obstruct the air intake in the front of the MPC or the fan exhausts in the rear panel of the 

MPC while the MPC is operating.

User Serviceable Parts

MPC‑1250 DC Output Series fans are user replaceable with kits available from SynQor. Please 

contact the SynQor factory for obtaining fan replacement kits and instructions (Replaceable Fan 

Module SYN‑9450). The MPC‑1250 DC Output Series has no other user serviceable parts inside 

of it. DO NOT REMOVE the cover of the unit or any of its connectors. Other than the fan assembly 

replacement, only factory trained personnel should perform repairs.

Содержание 1250













































Отзывы:

Нет отзывов