MOZELT GmbH & Co. KG
Load lifting magnet devices
Technical manual:
CoolGen 4
Copyright:
MOZELT GmbH & Co. KG, D-47269 Duisburg
Edition:
August 2014
Rev.:
00
Page 3
English
5. Electrical Connection
When working on energized power generators, the
applicable national accident prevention regulations shall
be observed.
The electrical installation is to be carried out in
accordance with the relevant regulations (e.g. line cross
sections, provision of safety arrangements). Further
instructions are given in the documentation.
The manufacturer of the system is responsible for
adherence to the EMC legislature. Instructions for
installation in accordance with the EMC Directive are
given in the documentation of the power generators.
6. Operation
Installations into which the generators are built must be
equipped, if necessary, with additional monitoring and
protection devices.
The manufacturer’s documentation is to be observed.
After separating the generators from the drive unit, live
components and line connections must not be touched
when the generator spindle is running, due to the
voltage.
All covers are to be kept closed during operation.
In the electronics, there are intermediate
circuit capacitors.
Their discharge may take longer than 10
minutes!
Before start of work, verify isolation from
power supply!
If this is not observed, serious personal
injuries with fatal result, severe injuries
to health or considerable damage to
property cannot be ruled out!
WARNING
7. Applicable Documents
A prerequisite for the use of a power
generator is that these operating
instructions have been read and
understood. In particular, the safety
notes contained there are to be
observed.
If these notes are not observed,
serious personal injuries with fatal
result, severe injuries to health or
considerable damage to property
cannot be ruled out!
WARNING
