OnCell G3470A-LTE
Web Console Configuration
3-18
Field
Description
Default setting
Private MIB
information Device
object ID
The object ID (OID) is the enterprise value for the OnCell
G3470A-LTE. This value is not configurable.
Port Forwarding
You can configure port forwarding settings on the OnCell G3470A-LTE to redirect specific packets from a
remote host on the WAN to a server on the LAN. This feature hides the IP address of a local server and
prevents remote hosts from accessing the local server directly.
The OnCell G3470A-LTE filters out unrecognized packets to protect your LAN network when computers
connected to the OnCell G3470A-LTE are not visible to the WAN.
NOTE
You can make LAN computers accessible from the Internet by enabling Virtual Server.
You can also configure port forwarding on the OnCell G3470A-LTE to redirect traffic to a specific port on a
LAN computer.
To access the
Port Forwarding
screen, click
Advanced Settings
Port Forwarding
. The OnCell
G3470A-LTE supports a total of 32 port forwarding rules.
The following table includes the field descriptions.
Field
Description
Factory Default
Enable
Select Enable to activate the port forwarding feature.
Disable
Active
Select this check box to activate the port forwarding entry.
Protocol
Select an option from the drop-down list.
Public Port
Enter the public port number.
Make sure that the port number specified is not already used
by OP modes.
Internal IP
Enter the IP address of a LAN device to receive the redirected
traffic.
Internal Port
Enter the port number on a LAN device to which to redirect
traffic.
