OnCell G3470A-LTE
Web Console Configuration
3-23
Field
Description
Factory Default
•
Restart by Peer:
Re-establish
the
VPN tunnel on Wait for
connecting mode.
DPD delay
The period of dead peer detection messages.
30
DPD timeout
Timeout to check if the connection is alive or not.
120
Configuring Pre-shared Key Settings
To configure pre-shared key authentication mode in phase 1 key exchange, in the
Tunnel settings
screen,
select
Pre-shared key
from the
Authentication mode
drop-down list. Then, enter a key in the text field.
Make sure that you configure the same key on the OnCell G3470A-LTE and the remote VPN gateway.
Configuring RSA Signature Settings
To configure RSA signature settings, complete the following steps:
1.
In the Tunnel Settings screen, select RSA Signature from the Authentication mode drop-down list.
2.
Generate or import a local private key. Perform one of the following actions:
•
Click
Generate Local Private
Key. The OnCell G3470A-LTE creates a private key and displays the
key information in the
Local private key
field.
•
Click
Import Local Private Key
and select a key file to import. After the OnCell G3470A-LTE
successfully imports the selected key, the system displays the key information in the
Local private
key
field.
3.
Generate or import a remote private key. Perform one of the following actions:
•
Click
Generate Remote Public Key
. The OnCell G3470A-LTE creates a public key and displays the
key information in the
Remote public key
field.
•
Click
Import Remote Public Key
and select a key file to import. After the OnCell G3470A-LTE
successfully imports the selected key, the system displays the key information in the
Remote public
key
field.
The following figure shows the certificate generation and certificate export/import example.
