OnCell G3470A-LTE
Web Console Configuration
3-12
GPS Settings
You can activate the GPS module function under GPS Settings, and then enable GPS serial mode under Real
COM mode or Reverse Real COM mode. OnCell Central Manager provides the current location, including
latitude and altitude information.
Setting
Description
Factory Default
GPS
Activate GPS module
Disable
Enable
Enable GPS Serial Mode
Disable
Serial Operation mode
Use OCM to get the location information under Real COM or
Reverse Real COM serial mode.
Real COM
TCP alive check time
This field specifies how long the OnCell G3470A-LTE will wait
for a response to “keep alive” packets before closing the TCP
connection. The OnCell G3470A-LTE checks the connection
status by sending periodic “keep alive” packets. If the remote
host does not respond to the packet within the time specified
in this field, the OnCell G3470A-LTE will force the existing
TCP connection to close. For socket and device control
modes, the OnCell G3470A-LTE will listen for another TCP
connection from another host after closing the connection. If
TCP alive check time
is set to 0, the TCP connection will
remain open but will not send any “keep alive” packets.
7 min
OnCell Central Manager Setting
For OnCell Central Manager settings, refer to the
OnCell Central Manager User’s Manual
, which can be
Advanced Settings
Several advanced functions are available to increase the functionality of your OnCell G3470A-LTE and
wireless network system. The DHCP server helps you deploy wireless clients efficiently. Packet filters
provide security mechanisms, such as firewalls, in different network layers. Moreover, SNMP support can
make network management easier.
