Moxa Technologies NPort 6000 Series, Руководство пользователя

Страница: 33 / 178

NPort 6000 Series Initial IP Address Configuration
3-6
11. Press S or use the arrow keys to select System and then press ENTER to restart the NPort 6000.
Serial Console
The NPort 6000 supports configuration through the serial console, which is the same as the Telnet console but
accessed through the RS-232 console port rather than through the network. Once you have entered the serial
console, the configuration options and instructions are the same as if you were using the Telnet console.
The following instructions and screenshots show how to enter the serial console using PComm Terminal
Emulator, which is available free of charge as part of the PComm Lite suite. You may use a different terminal
emulator utility, although your actual screens and procedures may vary slightly from the following instructions.
1. Turn off the power to the NPort 6000. Use a serial cable to connect the NPort 6000’s serial console port to
your computer’s male RS-232 serial port.
ATTENTION
The NPort 6610/ 6650 has a dedicated serial console port. For all other NPort 6000 models, port 1 serves as
the serial console port.
2. From the Windows desktop select Start

All Programs

PComm Lite

Terminal Emulator.
3. The PComm Terminal Emulator window should appear. From the Port Manager menu, select Open, or
simply click the Open icon as shown below:
4. The Property window opens automatically. Select the Communication Parameter tab, then select the
appropriate COM port for the connection (COM1 in this example). Configure the parameters for 19200, 8,
N, 1 (19200 for Baud Rate, 8 for Data Bits, None for Parity, and 1 for Stop Bits).