Moxa Technologies NPort 6000 Series, Руководство пользователя

Страница: 127 / 178

NPort 6000 Series System Management Settings
9-19
Auto Refresh:
Default (Enable): Auto refresh the status every 5 seconds.
Redundancy Protocol:
Shows which communication protocol is in use: Turbo Ring, Turbo Ring V2, RSTP, or none.
Status:
Shows Healthy if the ring is operating normally, and shows Break if the ring’s backup link is active.
Master Slave:
Indicates whether or not this NPort 6000 is the Master of the Turbo Ring. (This field appears only when Turbo
Ring or Turbo Ring V2 modes are active.)
ATTENTION
The user does not need to set the master to use Turbo Ring. If no master is set, the Turbo Ring protocol will
assign master status to one of the EDS units in the ring. The master is only used to determine which segment
serves as the backup path.
1st Redundant Port Status (Port 1)
2nd Redundant Port Status (Port 2)
The “Ports Status” indicators show Forwarding for normal transmission, Blocking if this port is connected to
a backup path and the path is blocked, and Link down if there is no connection.
Serial Data Log
Data logs for each serial port can be viewed in ASCII or HEX format. After selecting the serial port and format,
you may click Select all to select the entire log if you wish to copy and paste the contents into a text file.