![Moxa Technologies NPort 6000 Series Скачать руководство пользователя страница 102](http://html1.mh-extra.com/html/moxa-technologies/nport-6000-series/nport-6000-series_user-manual_1842565102.webp)
NPort 6000 Series
Configuring Serial Port Operation Modes
7-28
PPPD (PPP on demand) is used for dial-in services, since it provides PPP services only when receiving a request
from a remote PC.
Destination IP address: This is the IP address of the remote dial-in/ dial-out server.
Source IP address: The Source IP address is IP address assigned to this serial port.
IP netmask: The IP netmask defines the netmask, also known as the subnet mask, for the PPP connection
TCP/IP compression (default=Disable): The setting of this field depends on whether the remote user’s
application requests compression.
Inactivity time (default=0 ms): This field specifies the idle time setting for auto-disconnection. A setting of 0
ms will cause the port to remain connected even if idle.
Link quality report (default=Disable): Setting this field to Enable allows the NPort 6000 to disconnect a
connection if the link noise exceeds a certain threshold.
Username: This is the dial-out user ID account.
Password: This is the dial-out user password.
Authentication type (default=None): This field allows you to configure the method used, if any, to verify a
user’s ID and authorization.
Option
Description
Local
Verify the ID against the NPort 6000 User Table.
RADIUS
Verify the ID against the external RADIUS server.
RADIUS-Local
Radius authentication is tried first, switching to Local if unsuccessful.
Local-RADIUS
Authentication is performed locally first, switching to Radius if unsuccessful
Verify the ID against the external server.
-Local
authentication is tried first, switching to Local if unsuccessful.
Local-
Authentication is performed locally first, switching to Radius if unsuccessful
None
Authentication is not required.
Try next type on authentication denied (default=Disable): The field enables or disables the system to try
next type on first authentication denied.
Disconnect by (default=None): If this field is set as DCD-off, the connection will be disconnected when the
DCD signal is off. If this field is set as DSR-off, the connection will be disconnected when the DSR signal is off.
SLIP Mode
Содержание NPort 6000 Series
