Moxa Technologies CN2510-16, Руководство пользователя, Страница: 147 / 231

CN2510 Setting Up Printer
11-8
You may also save all settings from the MAIN MENU by selecting sAve and then pressing Enter . Press Enter
again to save, and any other key to cancel.
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server Port seTting [sAve] Utility Restart Exit
Save current configuration to Flash ROM
ESC: back to menu Enter: select
+-------------------------------------+
|Enter to updated, other key to cancel|
+-------------------------------------+
Restart
1. From the MAIN MENU , select Restart .
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server Port seTting sAve Utility [Restart] Exit
Restart the whole system or selected async ports
Enter: select ESC: previous menu
2. Select System and then press Enter to restart the system and terminate the Telnet session.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
[System] Port Quit
Restart the Async Server
ESC: back to menu Enter: select
+----------------------------------------------------------------------+
| Warning !!! |
| Restart system will disconnect all ports and clear all status value |
| ‘ Enter: continue ESC: cancel |
+----------------------------------------------------------------------+
Setting up Unix Hosts
UNIX uses the RLP program for remote parallel printing. For serial printing, Moxa provides the
asprint
utility
program, which consists of two files,
asprint.c
and
asprint.mak
. First uncompress
printer.tar.Z
to
the
\printer
directory, and then locate the files
asprint.c
and
asprint.mak
. To compile and link, you
may need to modify the source file
asprint.c
. For instance, in SCO UNIX you must link to the
libnls.a
library, in Solaris to
libnsl.a
, and in Venix to the
libnsl_s.a.