Moxa Technologies CN2510-16, Руководство пользователя

Страница: 112 / 231

CN2510 Setting Up Terminal
8-8
Setting Value Notes Necessity
Secondary host IP IP address or
the name
defined in the
[Host] table. If specified, designates a secondary ‘permanent’
host to which the terminal will be connected. Optional
Auto-login prompt ogin: Send ID information when this prompt is
received. Optional
Password prompt assword: Send Password information when this prompt is
received Optional
Login user name Login ID Optional
Login password Login Password Optional
Terminal type ansi Terminal type for outgoing connection Optional
Inactivity time 0-99 minutes Idle time before the port is disconnected
automatically. If set to 0 minutes, the port will
not disconnect. Optional
Authentication type None/local/
server None: Authentication is not required.
local: Check the ID stored in the User_table
(defined under the SERVER MENU).
Server: Check the ID with the external
RADIUS server. Refer to Appendix C for RADIUS
installation information.
Optional
TCP alive check time 0-99 minutes The time period CN2510 waits before checking if
the TCP connection is alive or not. If no response
is received, CN2510 will reset the port and
terminate the connection. Optional
5. Press Esc to return to the PORT MENU .
Configuring the Serial Ports
Open Port Menu

Line to configure serial port settings.
1. From the MAIN MENU , select Port , and then press Enter .
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server [Port] seTting sAve Utility Restart Exit
Examine/modify async server ports configuration
Enter: select ESC: previous menu
2. From the PORT MENU , select Mode , and then press Enter .
CN2510-8 CN2510-8_5631 V2.0 PORT MENU
------------------------------------------------------------------------------
Mode [Line] mOdem Welcome_MSG Quit
Examine/modify asynchronous port configuration
Enter: select ESC: previous menu