manualshive.com logo in svg

Motus M90T series, Руководство пользователя, Страница: 37 / 40

Поделиться
Скачать
Motus M90T series Скачать руководство пользователя страница 37

37

M90T SERIES

M90T SERIES

Management of Product

Belt Tension Adjustment

Note

Belt tension is properly adjusted before delivery. However, while exercising for a long time, the
tension can be loose.

- it is very important to keep belt’s tension constant for user’s safety

▷

▷

How to adjust

warning

1) Turn on the treadmill, press ‘START’ and then operate the treadmill with the speed of 4km/h. 

Walk on the treadmill. Tightly grip the front handlebar and apply force with feet on the striding near 

the motor cover against the moving direction. If the belt slips, do steps from 2). If it does not slip, 

the tension is proper.

2) Stop the treadmill for a safety during adjustment and prepare 10mm wrench. Do not adjust tension 

while treadmill is in operation.

- If you adjust the belt tension when the treadmill is in operation, it is very dangerous because 

sleeve or a part of body may be caught in roller or belt. 

3) There are belt adjustment bolts in the rear end cap of the treadmill, which enables you to adjust

belt tension. When turning this bolt, a position of roller moves back and forth. To  move backward

the roller, turn the bolt clockwise. To move forward the roller, turn the bolt counterclockwise.

4) Put 10mm wrench into the hole of the Right End Cap as below.

5) Turn the wrench 1/4 turn clockwise.

6) Put 10mm wrench into the hole of the Left End Cap as below.

7) Turn the wrench 1/4 turn clockwise.

8) Repeat steps 1) through 7) until the belt no longer slips. Do not exceed one full turn of the 

adjusting bolts in either direction. Over-tightening of the bolts may over stretch and damage the 

striding belt or roller bearings.

Содержание M90T series









































Отзывы:

Нет отзывов