manualshive.com logo in svg

Motus M90T series, Руководство пользователя, Страница: 36 / 40

Поделиться
Скачать
Motus M90T series Скачать руководство пользователя страница 36

36

MOTUS

M90T SERIES

Management of product

The belt is properly aligned at the factory before shipment. However, while delivering or exercising,
the belt can be misaligned from the original center position. The correct alignment or striding belt is
critical to the smooth operation of the treadmill.

▷

▷

How to align 

1. Balance the treadmill prior to any alignments if the striding surface of the  treadmill 

is not level.

▶

The belt may move off center by using the treadmill on uneven surface.

2. Check belt

’

s alignment

▶

Check if the belt drifts off center or not while treadmill is operated with the speed of 5km/h for a 

few minutes.

▶

Keep in mind whether the belt is off center to which direction, left or right.

3. Take the following steps to align the striding belt on the treadmill.

3-1  Make sure the treadmill is OFF and the striding belt has completely stopped. 
3-2  Find the right belt adjustment bolt in the rear end cap of the treadmill. 
3-3  Make belt adjustments on right belt adjustment bolt using the 10 mm hex key wrench provided.

- If the belt is off center to the right, turn the adjusting bolt 1/4 turn clockwise, which moves 

the striding belt to the left.

- If the belt is off center to the left, turn the adjusting bolt 1/4 turn counterclockwise, which 

moves the striding belt to the right.

3-4  Turn ON the treadmill, press ‘START’ and then operate the treadmill with the speed of 

5km/h.

3-5 Observe the striding belt for a few minutes. The belt should be centered on the deck.
3-6 If you need additional alignment, repeat steps 3-1 through 3-5 of this procedure until the 

belt is properly aligned.

Right End Cap

Roller

Striding Belt Alignment

CAUTION

If you hear any chafing, the belt is not

center-aligned or the belt appears to be
getting damaged, stop the treadmill and
contact authorized local dealer. Do not
exceed one full turn of the adjusting
bolts in either direction. If the belt does
not appear properly centered after on
full turn, contact Motus local dealer.

Important 

Do not turn the adjusting bolt more than
1/4 at a time. Over-tightening the bolt
can damage the treadmill.

Содержание M90T series









































Отзывы:

Нет отзывов