MOTU UltraLite-mk4, Руководство пользователя

Страница: 19 / 94

M O T U P R O A U D I O C O N T R O L W E B A P P
19
MAIN MIX AND MONITOR CHANNEL STRIPS
1
5
To access the Main Mix and Monitor bus
channel strips, go to the Mixing tab
(page 16) and scroll the display to the right,
beyond the inputs and groups.
To show and hide sections of the channel
strip, such as EQ or the Leveler, use the
Controls section of the side bar (item #3 in
the Mixing tab on page 16).
1. By default, the Monitor bus serves as a
solo bus. However, it can be set to mirror
the main mix bus, or any other aux bus,
group, or the reverb bus, in addition to
monitoring solo. Make this choice in the
source menu (13). Use the Routing grid
(page 15) to specify the output for the
Monitor bus.
2. The Main Mix bus is the primary stereo
mix.
3. Provides hardware settings, if the
assigned output pair has them. For
example, if the Main Mix bus is assigned
to the Main Outs on the UltraLite-mk4,
you’ll see trim settings for the outputs.
This item is grayed out if there are no
hardware settings for output.
4. Use this output assignment widget to
choose the destination — or multiple
destinations — for the bus. You can also
make this setting directly on the
Routing grid (page 15).
5. Use the preset menus to create save,
recall, and otherwise manage channel
strip presets for the Monitor bus and
Main Mix bus.
6. Indicates that the bus is stereo.
7. The four-band parametric EQ for the
Main Mix bus operates the same as
described for input channels (items 10
and 11 on page 18), including High and
Low Shelf filter options.
8. The thumbnail EQ Graph displays the
currently enabled EQ filters, if any. Click
it to open the full-size, editable EQ
Graph (Figure 8-4 on page 55).
9. The Leveler provides specialized gain
reduction modeled after the legendary
Teletronix LA-2A Leveling Amplifier. For
complete details, see “Leveler” on
page 57.
10. Mutes for the Main Mix bus and Monitor
bus.
11. Master faders for the Main Mix bus and
Monitor bus. Use the same techniques
described for input channel faders
(items 19, 20 and 21 on page 18).
12. When Follow Solo is enabled, the
Monitor bus switches to the solo bus
when any channel is soloed. NOTE: if an
aux bus is soloed, then the Monitor bus
carries only the soloed aux bus (any
current channel solos are excluded).
13. Choose the source for the Monitor bus
from this menu. It can mirror the main
mix, any aux bus, group, the reverb bus,
or it can serve only as a Solo bus.
14. The SC button clears all solos.
15. This mid-band EQ is currently disabled
(and therefore grayed out).
14
7
9
10
11
13
12
2
15
3 4 5 6
3 4
8