MOTU UltraLite-mk4, Руководство пользователя

Страница: 15 / 94

M O T U P R O A U D I O C O N T R O L W E B A P P
15
ROUTING TAB
6 4 8
11
3
2
12
The Routing Tab lets you route inputs to
outputs. Outputs are listed by row on the
left; inputs are listed in columns across
the top. Simply click in the grid to make
a single connection. Click and drag to
make multiple connections in one
gesture. To route a single input to multi-
ple outputs, make multiple connections
vertically in the same column below the
input. To mix multiple inputs to the
same output, you’ll need to use the
mixer (page 16) and the
Mix In bank in
the routing tab (16).
1. In its collapsed form, (shown here),
the sidebar displays icons for each
tab.
2. Click this icon to view the Routing
tab, shown on this page.
3. Click here to show or hide the
sidebar.
4. Create, save, recall and manage
routing presets.
5. Locks the grid to prevent accidental
changes. Unlock to make changes to
the grid.
6. Outputs are listed in rows on the left.
7. When you make a connection, the
source (input) signal is listed by
name here in the Source column,
just to the right of the output it is
being routed to.
8. Inputs are listed in columns across
the top of the grid, starting with the
physical inputs on the hardware
itself. In this example, the two mic
inputs and six analog (line) inputs
are being routed to the computer
(over USB).
9. The From Computer input bank lets
you route audio channels from your
host audio software to any output,
including the mixer, where you can
mix computer audio with local
inputs. Use the Device tab to choose
how many computer channels are
available. In this example, computer
channels 1-2 are being routed to
both the headphone output and the
Main Outs (L-R).
10. These input streams are busses that
originate from the mixer, which
supplies the main mix bus, monitor
mix bus, seven stereo aux busses,
three stereo group busses, a reverb
return bus and postFX channel sends
(for sending processed inputs to the
computer or elsewhere). You can
route these mixer busses to any
outputs you wish (6), including
physical outputs, host software on
your computer, or even back in to
the mixer (beware of feedback
loops!)
11. Use these triangles to expand or
collapse groups of inputs. For
example, it might be convenient to
collapse banks that you are not
using at the moment.
12. Click a channel label to rename it.
13. Audio activity indicators.
14. Here, Computer channels 1-2 are
being routed to the Main Outs on
the UltraLite-mk4.
15. Click the grid to make a connection.
Click a connection to remove it. Click
and drag to make or break multiple
connections in one gesture. Note:
both the input and output must be
expanded or collapsed (11) when
clicking to make a connection.
16. The Mix In group lets you route audio
to the 48-channel mixer.
17. The To Computer output bank
(currently collapsed in this example)
routes any input to host audio
software running on your computer.
Use the Device tab to choose how
many computer channels are avail-
able.
18. Use these triangles to expand or
collapse groups of outputs.
19. These represent the physical analog
outputs on the interface itself.
1
7
15
9 10
13
18
16
17
19
14
5