MOTU 896mk3, Руководство пользователя

Страница: 99 / 112

C U E M I X C O N S O L E
99
Talkback / Listenback Mic Input
To configure the talkback mic in CueMix FX, go to
the Inputs tab (Figure 11-3 on page 80) and click
the Focus button for the input that the talkback mic
is connected to. Click the Channel tab (Figure 11-8
on page 84) and enable the
Talk button.
Repeat this procedure for the Listenback mic,
except click the
Listen button in the Channel tab.
Talk / Listen output
To configure the talkback and listen back outputs,
go to the Outputs tab (Figure 11-6 on page 83) and
enable the
Talk button for any output pair on which
you’d like to hear the talkback mic. Similarly,
enable the
Listen button for any output pair on
which you’d like to hear the listenback mic.
Talkback / Listenback Monitor Dim
Use the knobs next to the Talk and Listen buttons
(Figure 11-26) to determine the amount of
attenuation you would like to apply to all other
audio signals (besides the talkback/listenback
signal) when Talkback and/or Listenback is
engaged. To completely silence all other CueMix
audio, turn them all the way down. Attenuation
only occurs when talkback or listenback is
engaged. Audio playing back from disk (your host
software) is not affected.
Figure 11-26: The Talkback/Listenback controls.
Engaging/disengaging Talkback and
Listenback
To engage Talk back or Listenback, press on the
Talk or Listen buttons (Figure 11-26) and then
release to disengage. Talkback and/or Listenback is
engaged for as long as you hold down the mouse
button. Option-click to make the buttons “sticky”
(stay engaged until you click them again — so you
don’t have to hold down the mouse). Or use the
Talkback menu items.
If you would like to engage both Talkback and
Listenback at the same time, enable the
Link button
(Figure 11-26).
Controlling Talkback and Listenback volume
To control the volume of the Talkback and/or
Listenback mics, adjust their input trim in CueMix
FX.
SHORTCUTS
Hold down the following general modifier keys as
shortcuts:
Hold down the following modifier keys as
shortcuts for the EQ tab and controls:
Talk dim
Listen dim
Shortcut Result
Shift key Applies your action to all inputs or all out-
puts in the mix.
Command key Applies your action to the stereo input pair,
even when it is currently configured as mono.
Option key Applies your action to all busses.
Shift-Option Applies your action to all inputs and mixes.
Double-click Returns the control to its default value (pan
center, unity gain, etc.)
Shortcut Result
Shift click Applies EQ button change to all input or out-
puts.
Option-click Applies EQ enable button changes to all
bands in that input or output.
Shift-Option-
click Applies EQ enable button changes to all
bands and all inputs or outputs.