MOTU 896mk3, Руководство пользователя

Страница: 84 / 112

C U E M I X C O N S O L E
84
THE CHANNEL SETTINGS SECTION
The channel settings section in the CueMix FX
window (Figure 11-1) displays three tabs for
Channel, EQ and Dynamics settings for the
channel with the current focus. There are also two
global tabs: the Meter Bridge and the Reverb
Processor, as shown below.
Figure 11-7: The Channel Settings section.
The Channel tab
The Channel tab (Figure 11-8) displays settings for
input channels. Click any focus button in the
Inputs tab to view the Channel tab settings for the
channel.
Figure 11-8: The Channel tab.
Signal flow
Settings in the Channel tab occur just before the
EQ, dynamics and reverb sends in the Input tab
channel strip (Figure 11-3 on page 80). Input
channel signal flow is as follows: trim, overload
protection, phase, stereo versus M/S decoding,
width, L/R swap, EQ, dynamics and reverb send.
Stereo settings
Inputs that have been grouped as stereo pairs in the
Inputs tab (Figure 11-3) provide two stereo modes
(Figure 11-8):
Normal and M/S . M/S mode
provides decoding for a mid-side microphone
configuration.
Tabs for the channel that
currently has the focus
Tabs for the global meter
bridge and reverb processor