MOTU 896mk3, Руководство пользователя

Страница: 88 / 112

C U E M I X C O N S O L E
88
types (I, II, III or IV). The two top-most filters
(orange and green) provide an extra low and high
shelf setting, in addition to the four standard band
settings. The additional low pass and high pass
filters (lower left) have gray cutoff frequency knobs
and six settings for slope (in octaves/dB).
Frequency response display
The frequency response display at the top of the
window displays the response curve of the current
settings in the window. The (horizontal) frequency
range is from 10 hertz to 20 KHz. The (vertical)
amplitude scale is in dB and is adjustable between 3
and 24 dB using the
vertical scale buttons
(Figure 11-10).
Showing and hiding filter curves
To view a filter in the display, turn on the filter. The
shape of the filter, according to its current settings,
is shaded in the same color as the filter’s knob(s).
Use the
filter curve toggle (Figure 11-10) to show or
hide them in the display.
Adjusting filters in the display
Each filter has a handle, displayed as shown below
in Figure 11-12 (in the filter’s color), for adjusting
its boost/cut and/or frequency:
Figure 11-12: Drag the filter handle to adjust its frequency and/or
boost/cut. Drag the Filter Q handles to adjust the Q.
For the EQ filters, when you click the handle, you’ll
also see lines on either side for adjusting the Q
parameter, as shown above.
EQ filters
The EQ filters have three parameters:
Q
The Q setting does not have a unit of measurement.
Rather, it is the ratio of the filter’s center frequency
to the bandwidth of the filter. In addition, the
actual Q value for the EQ curve being applied is
dependent on three factors: the gain setting, the
filter style, and the Q setting.
Filter types
Each filter can be independently set to one of four
different filter types: I, II, III and IV. These, and the
additional shelf filters for the LMF and HMF band,
are discussed in the section “EQ filter styles”.
Returning to zero (or nominal frequency)
To return a knob to zero, or it’s nominal frequency,
double-click it.
EQ filter styles
EQ is one of the most widely used processing tools
and can be applied to many different situations,
from minor corrective tasks to highly creative
applications. Over the years, many EQs have been
engineered for specific applications or to achieve a
certain sound. The Vintage EQ has been designed
to be flexible enough to cover a broad range of
applications. To that end, several different filter
types are supplied, varying mostly in the way they
handle the dynamic interaction between Gain and
Q. This crucial relationship has been modeled to
emulate the smooth and musical character of
classic analog EQ circuits, in which the Gain/Q
dependency was dictated by the actual circuit
design and electrical components used.
Filter Q
(red line)
Filter handle
Control unit range
Gain dB -20.00 to +20.00
Frequency Hertz 20 Hz to 20 kHz
Q n/a - see note below 0.01 to 3.00