Fm210_01b_oi_e.docx / Nov-20
Page 25 / 40
Process Jog: New setting of Jog before 0Hz are reached (Special Mode = 0)
Process Jog: New setting of Jog before 0Hz are reached (Special Mode not equal to zero)
Prestop Mark
The Prestop Mark function corresponds to the pre-stop signal. This command is used with Reference
and Prestop Edge.
Triggering Parameter
Comment
Addition
Input
Input X Config = 0/1
Input X Function = 9
If Input X Config = 0 is set, the command is
triggered in case of a "low" state at input X.
The status of the input can be
read in the OS Input field
Lecom
Code 57 (dec)
Release: 04 31 31 02 35 37 30 03 31
Set: 04 31 31 02 35 37 31 03 30
(Unit no. 11, command in hex)
If a 1 is written at code 57, the
command is set.
Modbus
FF12 (hex)
Release: 07 06 FF 12 00 00 19 BD
Set: 07 06 FF 12 00 01 D8 7D
(Modbus address = 7, command in hex)
If a 1 is written to FF12, the
command is set.
