Motorola V150 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 54

Motorola V150 Скачать руководство пользователя страница 12

12

August 20, 2003

6809471A67-O

Product Overview

V150

• 96 X 65 pixel color graphical display with 4 lines of text, 1 line of icons, and 1

line of prompts

• Display zoom
• Display animation
• VibraCall® vibrating alert
• 4-Way navigation key

• Downloadable wallpaper and ring tones

3

• Voice activation for phone book entries
• Simplified text entry using iTAP™ predictive text entry

• Calling line identification

3

• Supports call diverting for incoming voice calls

3

• Supports 3V SIM cards

• SIM Toolkit™ Class 2 (STK)

3

• Personal management tools calculator with currency converter, real time clock

with date, reminders, and caller profiling

• Phase II Unstructured Supplementary Service Data (USSD)

3

• Hearing Aid Telephone Interconnection System (HATIS) support

• Chat messaging via WAP over GPRS

3

• Multiple destination SMS
• TrueSync™ Multi-Point Synchronization Capability

Speaker Dependant Voice Activation

The voice dialing feature allows the user to recall pre-programmed voice numbers
simply by pressing the Voice/Ok key and speaking the desired voice tag. Up to 10
voice tags can be stored.

Wireless Access Protocol (WAP) 1.2 Compliancy

In the WAP environment, access to the Internet is initiated in wireless markup
language (WML), which is derived from hypertext markup language (HTML). The
request is passed to a WAP gateway which retrieves the information from the server
in standard HTML (subsequently filtered to WML) or directly in WML if available.
The information is then passed to the mobile subscriber via the mobile network.

3. Network, subscription and SIM card or service provider dependent feature. Not available in all areas.

➧

The user cannot place or receive calls while adding voice tags to the phone’s memory.

➧

Because the GSM standard does not provide the option to store voice tags onto the
SIM card, voice tags are added to the phone’s memory.

➧

Bitmap image data will download as text. If the image is larger than the screen,
only part of the image will display.

«
...
10
11
12
13
14
...
»

Содержание V150























































Отзывы:

Нет отзывов