7
REPEATER OVERVIEW
Note:
(1) The repeater works best when located in an
ideal place that can have good reception for
re-transmitting the signal without any problems.
Refer to "Pre-Installation Considerations” on
page 10 for more information.
(2) The repeater is manufactured to MIL SPEC
810 C, D, E and F and G and IP55, makes it
robust enough to meet stringent specifications
for shock, rain, humidity and salt fog, vibration,
sand/dust, temperature shock, high and low
temperatures.
(3) The repeater is not a submersible device
(Refer to "Appendix A: Repeater Specifications”
on page 63 for more information) and it is NOT
an FM (Factory Mutual) certified device.
(4) Out of the 16 pre-programmed channels
that are available out of the box, you can select
only ONE channel each time you TX/RX with
the repeater. The repeater is NOT a multi-
channel repeater.
(5) The repeater’s CPS software is required.
Refer to "Programming The Repeater” on
page 38 for more information.
Note:
Refer to the chapters "Pre-Installation
Considerations” on page 10 and "Repeater
Installation” on page 17
for proper repeater
location and operation.
Figure 2a. Warehouse Application Example
Figure 2b. Temporary Application Example
2000018_B_PORS_en.book Page 7 Thursday, January 14, 2010 2:10 PM
