PROG
RAM
M
ING THE
REPEATER
42
User Guide
CPS Connection Troubleshooting
Table 7: Programming Mode: Troubleshooting
Symptom
Try This
CPS doesn’t read the
repeater or write to the
repeater
Make sure the CPS cable is securely connected on both ends
(programming port in the repeater and USB port in the computer). Make
sure your repeater hasn’t run out completely of battery power or it is
connected to an AC/DC supply. Make sure the CPS cable is not damaged.
CPS displays “Error:
Communication Error”
when trying to read or
write to the repeater
Make sure your repeater is ON/Double check that the repeater model
matches your CPS version and region as they should be compatible in order
to read and write. For checking your CPS version, click in the “about” icon in
the upper tool bar.
CPS displays “your
repeater doesn’t match
your region”
Double check that the radio model matches your CPS version and region as
they should be compatible in order to read or write. For checking your CPS
version, click on the “about” icon in the upper tool bar.
When trying to clone
the repeater, the CPS
displays an error or the
cloning fails
Please refer to “Cloning Repeaters” in the CPS Help File for details on
cloning details.
2000018_B_PORS_en.book Page 42 Thursday, January 14, 2010 2:10 PM
