Motorola Netopia 7000, Руководство администратора

Страница: 303 / 368

303
Wireless Settings (supported models)
set wireless option ( on | off )
Administratively enables or disables the wireless inter face.
set wireless network-id ssid { network_name }
Specifies the wireless network id for the Gateway. A unique ssid is generated for each Gateway. You must
set your wireless clients to connect to this exact id, which can be changed to any 32-character string.
set wireless auto-channel mode { off | at-startup | continuous }
Specifies the wireless AutoChannel Setting for 802.11G models. AutoChannel is a feature that allows the
Motorola Netopia® Gateway to determine the best channel to broadcast automatically. For details, see
“Advanced” on page 56 .
set wireless default-channel { 1...14 }
Specifies the wireless 2.4GHz sub channel on which the wireless Gateway will operate. For US operation,
this is limited to channels 1–11. Other countries var y; for example, Japan is channel 14 only. The default
channel in the US is 6. Channel selection can have a significant impact on per formance, depending on
other wireless activity in proximity to this AP. Channel selection is not necessar y at the clients; clients will
scan the available channels and look for APs using the same ssid as the client.
set wireless network-id closed-system { on | off }
When this setting is enabled, a client must know the ssid in order to connect or even see the wireless
access point. When disabled, a client may scan for available wireless access points and will see this one.
Enable this setting for greater security. The default is
on .
set wireless mode { both-b-and-g | b-only | g-only }
Specifies the wireless operating mode for connecting wireless clients: both-b-and-g , b-only , or g-only ,
and locks the Gateway in that mode.
☛
NOTE:
If you choose to limit the operating mode to B or G only, clients using the mode you excluded
will not be able to connect.
set wireless multi-ssid option { on | off }
Enables or disables the
multi-ssid
feature which allows you to add additional network identifiers (SSIDs or
Network Names ) for your wireless network. When enabled, you can specify up to three additional SSIDs with
separate privacy settings for each. See below.