manualshive.com logo in svg

Motorola Netopia 7000, Руководство администратора

Поделиться
Скачать
Motorola Netopia 7000 Скачать руководство пользователя страница 294

Administrator’s Handbook

294

Packet Filtering Settings

Packet Filtering has two par ts:

•

Create/Edit/Delete Filter Sets, create/edit/delete rules to a Filter Set.

•

Associate a created Filter Set with a WAN or LAN inter face

See 

“Packet Filter” on page 163

 for more information.

set security pkt-filter filterset 

filterset-name

 [ input_filter | output_filter ] 

index

 

      forward [ on | off ]

Creates or edits a filter rule, specifying whether packets will be for warded or not.

☛  

NOTE:

If this is the first rule, it will create the filter-set called 

filterset-name

, other wise it will edit the 

filterset.
If the index is not consecutive, the system will select the next consecutive index. If the index 
does not exist, a rule will be created. If a rule exists, the rule will be edited.

set security pkt-filter filterset 

filterset-name

 [ input_filter | output_filter ] 

index

 

      idle-reset [ on | off ]

Turns idle reset on or off for the specified filter rule. A match on this rule resets idle-timeout status and 
keeps the WAN connection alive. The default is 

off

. For 

idle-reset

 to be displayed, 

forward

 must be 

enabled on a filter rule.

set security pkt-filter filterset 

filterset-name

 [ input_filter | output_filter ] 

index

 

     frc-rte [ on | off ]

Turns forced routing on or off for the specified filter rule. A match on this rule will force a route for packets. 
The default is 

off

. For 

frc-rte

 to be displayed, 

forward

 must be enabled on a filter rule.

set security pkt-filter filterset 

filterset-name

 [ input_filter | output_filter ] 

index

 

      gateway 

ip_addr

Specifies the gateway IP address for forced routed packets, if forced routing is enabled.

set security pkt-filter filterset 

filterset-name

 [ input_filter | output_filter ] 

index

 

      src-ip 

ip_addr

Specifies the source IP address to match packets (where the packet was sent from).

set security pkt-filter filterset 

filterset-name

 [ input_filter | output_filter ] 

index

 

      src-mask 

mask

Specifies the source IP mask to match packets (where the packet was sent from).

Содержание Netopia 7000

















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды