Motorola Netopia 7000, Руководство администратора

Страница: 229 / 368

229
You can include one or more of the following arguments with the download command. If you omit argu-
ments, the console prompts you for this information.
•
The
server_address
argument identifies the IP address of the TFTP ser ver from which you want to
copy the Motorola Netopia® Gateway configuration file.
•
The filename argument identifies the path and name of the configuration file on the TFTP ser ver.
•
If you include the optional confirm keyword, the download begins as soon as all information is entered.
You can also download an SSL cer tificate file from a trusted Cer tification Authority (CA), on platforms that
suppor t SSL, as follows:
download [-cert] [ server_address ] [ filename ] [confirm]
install [ server_address ] [ filename ] [confirm]
(Not suppor ted on model 3342/3352)
Downloads a new version of the Motorola Netopia® Gateway operating software from a TFTP (Trivial File
Transfer Protocol) ser ver, validates the software image, and programs the image into the Motorola Neto-
pia® Gateway memor y. After you install new operating software, you must restar t the Motorola Netopia®
Gateway.
The
server_address
argument identifies the IP address of the TFTP ser ver on which your Motorola Neto-
pia® Gateway operating software is stored. The
filename
argument identifies the path and name of the
operating software file on the TFTP ser ver.
If you include the optional keyword
confirm
, you will not be prompted to confirm whether or not you want
to per form the operation.
license [key]
This command installs a software upgrade key. An upgrade key is a purchased item, based on the serial
number of the gateway.
log
message_string
Adds the message in the message_string argument to the Motorola Netopia® Gateway diagnostic log.
loglevel [ level ]
Displays or modifies the types of log messages you want the Motorola Netopia® Gateway to record. If you
enter the
loglevel command without the optional
level
argument, the command line inter face dis-
plays the current log level setting.
You can enter the
loglevel
command with the level argument to specify the types of diagnostic mes-
sages you want to record. All messages with a level number equal to or greater than the level you specify
are recorded. For example, if you specify loglevel 3, the diagnostic log will retain high-level informational
messages (level 3), warnings (level 4), and failure messages (level 5).
Use the following values for the
level
argument: