manualshive.com logo in svg

Motorola Netopia 7000, Руководство администратора

Поделиться
Скачать
Motorola Netopia 7000 Скачать руководство пользователя страница 155

155

•

DoS Detect

: If you check this checkbox, the Gateway will monitor packets for Denial of Ser vice attacks.

•

Exposed Addresses

: The hosts specified in Exposed Addresses will be allowed to receive inbound traf-

fic even if there is no corresponding outbound traffic. This is active only if NAT is disabled on a WAN 
inter face.

•

Stateful Inspection Options

: Enable and configure stateful inspection on a WAN inter face.

Exposed Addresses

You can specify the IP addresses you want to expose by clicking the 

Exposed addresses

 link.

Add, Edit, or delete exposed addresses options are active only if NAT is disabled on a WAN inter face. The 
hosts specified in exposed addresses will be allowed to receive inbound traffic even if there is no corre-
sponding outbound traffic.

•

Start Address

: Star t IP Address of the exposed host range.

•

End Address

: End IP Address of the exposed host range

•

Protocol

: Select the Protocol of the traffic to be allowed to the host range from the pull-down menu. 

Options are Any, TCP, UDP, or TCP/UDP.

•

Start Port

: Star t por t of the range to be allowed to the host range. The acceptable range is from 1 - 

65535

•

End Port

: Protocol of the traffic to be allowed to the host range. The acceptable range is from 1 - 65535 

Содержание Netopia 7000

















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды