4-4
Maintenance
• Next, rub the soldering iron tip along the edge of the shield to smooth out any excess sol-
der. Use solder wick and a soldering iron to remove excess solder from the solder pads on
the circuit board.
• Place the circuit board back in the R1070’s circuit board holder.
• Place the shield on the circuit board using a pair of tweezers.
• Position the heat-focus head over the shield and lower it to approximately 1/8” (0.3 cm)
above the shield.
• Turn on the heater and wait for the solder to reflow.
• Once complete, turn off the heat, raise the heat-focus head and wait approximately one
minute for the part to cool.
• Remove the circuit board and inspect the repair. No cleaning should be necessary.
4.6
Recommended Test Tools
Table 4-1. lists the recommended tools used for maintaining this family of radios. These tools are also
available from Motorola.
Table 4-1. Recommended Test Tools
Motorola Part Number
Description
Application
RSX4043
Torx Driver
Tighten and remove chassis screws.
6680387A70
T-6 Torx Bit
Removable Torx driver bit.
R1453A
Digital readout solder station
Digitally controlled soldering iron.
0180386A78
Illuminated magnifying glass
with lens attachment.
0180386A82
6684253C72
6680384A98
1010041A86
1080303E45
Anti-static grounding kit
Straight prober
Brush
Solder (RMA type),
63/37, 0.5mm diameter
1 lb. spool
SMD tool kit (included with
R1319A)
Used during all radio assembly and disassembly pro-
cedures.
R1319A (110V)
or R1321A(220V)
ChipMaster Surface Mount
Rework Station
Removal and assembly of surface-mounted inte-
grated circuits and shields includes 5 nozzels.
R1364A
Digital Heated Tweezer Sys-
tem
Chip component removal.
R1427A
Board Preheater
Reduces heatsink on multi level boards.
8880309B53
Rework Equipment Catalog
Contains application notes, procedures and technical
rework equipment.
Содержание HT1250-LS+
